TOUCH UP PAINTING TECHNIQUES

PAINT HINTS

Learn everything you need to know for car refinishing. Whatever your problem may be, the advice from our expert will make your job easier. Take advantage of this superior competence and knowledge!

1. Surfaces must be clean, dry and free from grease, after rust has been removed and all filling, sanding, cleaning had been done.

2. Mask off surrounding parts by paper and tape, prime the surfaces. The ideal working temperature is between + 20 and + 25 °C. Avoid direct sunlight.

3. When spraying, keep aerosol always upright. Check colour shade. The correct spraying distance is 25 cm. Start spraying outside of your object. Apply several thin layers in a crosswise motion – this means spraying one layer horizontally and one layer vertically. 2 – 3 minutes flash off between layers.

4. Spraying should be done in well ventilated rooms or in the open air (odours!). When job is completed reverse aerosol and spray valve clean. 

DENTS & SCRATCHES PAINT PREPARATION

 RUSTING THROUGH PREPARATION

 SCRATCHES AND STONE CHIPS

TOPCOATING PREPARATION